|
$dial_limit [CFG] |
  
|
|
$dial_limit [CFG] |
|
Limit Simultaneous Dial Operations
$dial_limit node count
This command limits the number of concurrent dial operations, to reduce the load on a connected telephone switch. Setting this value prevents the switch from becoming overloaded, for example when CopiaFacts first starts up or when a new schedule period starts with a broadcast waiting.
The parameters on this command are used as follows:
| node | the nodename affected, or * for all nodes. Only a single command may be used for each node. |
| count | The maximum number of simultanous dial operations on the node. |
When the limit is reached, the outbound operation will be delayed. The delay time is varied by reference to the line number, so that the problem is not repeated after the delay time expires.
Hardware Issues: Brooktrout, Dialogic and Commetrex and Dialogic Diva only (not calls dialled on an analog Gammalink board).
Default: No limit on simultaneous dials.
Example:
$dial_limit * 15
Topic url: http://www.copia.com/support/refmanual/index.html?$dial_limit.htm