|
$fax_status1 [FS] |
  
|
|
$fax_status1 [FS] |
|
Control Outbound Processing Status-1
$fax_status1 status [lineno]
This command identifies the current processing status of the outbound fax, voice or e-mail transmission.
The parameters on this command are used as follows:
| status | a numeric status value as follows: |
| 0 | awaiting pre-processing |
| 1 | preprocessing in progress (set by pre-process) |
| 2 | ready for transmission |
| 3 | transmission in progress |
| 4 | awaiting post-processing |
| 5 | post-processing in progress (set by post-process) |
| 6 | completed |
| lineno | the line processing the file (recorded in status 3 only). A status can be left at 3 if for example the power fails during a transmission, and having the active line present allows such files to be recognized and moved to the FAIL directory (with a $fax_status2 value of 66). Without the line number it would be impossible to distinguish such a file from one relating to a real transmission actually in progress on a line controlled by another node. |
Note that status values 0, 1, 4 and 5 apply only to $fax_pre-process and $fax_post-process keywords EXTERNAL and INTERNAL. These keywords remain available for legacy applications but the INFOBOX keywords are now recommended for new applications. INFOBOX pre- and post- processing is performed automatically before and after tranmission and do not depend on this status value.
Default: 2 (ready for transmission)
Example:
$fax_status1 2
.
Topic url: http://www.copia.com/support/refmanual/index.html?$fax_status1.htm