|
$rcrd_msg [USR] |
  
|
|
$rcrd_msg [USR] |
|
Set the Option to Accept a Voice Message from the Caller
$rcrd_msg length
This command specifies that you want to invite each caller to leave a recorded message, which will be placed in the default message directory specified using $rcrd_dir (unless overridden).
The parameter on this command is used as follows:
| length | the maximum message length in seconds. A length of 0 may be used to allow the caller to leave a message of any length. The value can be overridden by the $record_limit command. |
Each second of recorded speech requires about 3K of storage. The recording may also be terminated by the caller pressing a touch-tone key or by five seconds of silence. The five-second length of the timeout may be overridden by assignment to the MAXSIL system variable.
Default: none (required if recording messages)
Message Played: When caller recorded messages are enabled, standard voice prompt 12 asks if the caller wants to leave a message.
Example:
$rcrd_msg 45 ; limit message to 45 seconds
$rcrd_msg 0 ; let caller talk as long as he wants
Topic url: http://www.copia.com/support/refmanual/index.html?$rcrd_msg.htm