|
$ascii_font [USR, UJP] |
  
|
|
$ascii_font [USR, UJP] |
|
Set ASCII Font and Margin Options
$ascii_font font [leftm [rightm]]
This command is used to specify ASCII file parameters on Brooktrout TR114 and Gammalink fax boards. It overrides the default values for each line which are specified in the configuration file using $ascii_font. The font value on the $fax_filename command also overrides this value.
The parameters on this command are used as follows:
| font | For Brooktrout, the font number used to specify the font in BTCALL.CFG. For Gammalink, a code 2 to select a smaller font than normal. An invalid value will select the default font (0). |
| leftm | The size of the left margin in tenths of an inch, for Brooktrout boards only. Values between 0 and 12 are valid. The default is 5. |
| rightm | The size of the right margin in tenths of an inch, for Brooktrout boards only. Values between 0 and 12 are valid. The default is 0. |
Default: The values specified in the configuration file, or 0 5 0 if none.
Example:
$ascii_font 2 3 ; select font 2, left margin 3
Topic url: http://www.copia.com/support/refmanual/index.html?%24ascii_font_usr.htm