|
$baud_min [CFG] |
  
|
|
$baud_min [CFG] |
|
Set the Lowest Transmission Speed Allowed
$baud_min line baud
This command sets the lowest baud rate allowed for image transmission. If the baud rate drops below the minimum during transmission, the call will be terminated.
This command can be overridden for a specific application by using a $baud_min command in the user profile.
CopiaFacts does not prevent you from setting the minimum baud rate to be greater than the maximum baud rate. If this is the case on a system supporting both commands, all faxes will fail.
The parameters on this command are used as follows:
| line | the line number or line group(s) affected, or * for all lines. The same line must not be specified more than once. |
| baud | minimum rate, a multiple of 2400 up to 33600. |
Hardware Issues: This command is currently not available on Gammalink fax boards.
Default: All baud rates will be acceptable.
Example:
$baud_min 7200 ; stop transmission if under 7200 baud
Topic url: http://www.copia.com/support/refmanual/index.html?%24baud_min_cfg.htm