|
$fax_send_line [USR, UJP] |
  
|
|
$fax_send_line [USR, UJP] |
|
Set the Line for Outbound Calls
$fax_send_line line [channelrange]
This command specifies that a particular outgoing line or line group is to be used for callbacks in this application. For a callback request, CopiaFacts places a copy of this command as the $fax_send_line command in an FS file.
In a .USR file, this command has no effect on fax broadcasts nor on any server operations using externally generated FS files. It only affects the contents of a callback FS file generated from a fax on demand or fax mail retrieval request.
In a .UJP file, using this command is equivalent to specifying the $fax_send_line command in every FS file of the job.
The parameter on this command is used as follows:
| line | the line number or line group(s) to be used, which must specify a valid outbound line for the system but need not be on the same network node that is processing the request. |
| channelrange | a single range of telephony channel numbers to indicate the telephony board to be used for the outbound call. Currently this parameter applies only to Dialogic primary-rate telephony connections only. |
Default: any line configured for outbound may be used.
Examples:
$fax_send_line 8 ; use user line 8
$fax_send_line 5 ; force WATS line use
$fax_send_line BC1,BC2 ; use two line groups defined in CFG
$fax_send_line 1-6 31-60 ; limit to first six fax
; channels and second E1 board
Topic url: http://www.copia.com/support/refmanual/index.html?%24fax_send_line_usr.htm