Navigation:  Commands > Fax to Send File [FS] >

$poll_phone [FS]

Previous pageReturn to chapter overviewNext page

Specify Phone number for Polled Collection

$poll_phone phonenum mailbox


This command identifies the fax phone number to call in an outbound operation for "call and receive" polling (which requires pollout line operation enabled). This is a required command for this application and must not be used in the same file as $fax_phone.

The parameters on this command are used as follows:

phonenum fax phone number to call, enclosed in double quotes if it contains embedded spaces.
mailbox mailbox number to receive the fax.

If the phone number contains embedded spaces parentheses, square brackets, hyphens, tilde or slash characters, they are discarded. The processing of '+' is affected by the $country_prefix configuration command. The number is then processed as specified in the $phone_mask command, if any. Any other non-numeric character causes all following characters to be excluded from phone-mask matching (and then replaced). This allows you to specify, for example, a delay and then dialing an extension number (e.g. ",,,34"). It also allows a standard dial command prefix (e.g. "TW") to be used to bypass phone-mask processing altogether.

In PRI-ISDN systems, non-numeric characters (other than those listed above as discarded) in a dial string cause the number to be rejected, since special prefix characters are never valid.

Default: none (required entry for poll calls)

Example:

$poll_phone "6307788848"

 


Topic url: http://www.copia.com/support/refmanual/index.html?%24poll_phone.htm