Brooktrout Version Information
From release 7.391, CopiaFacts supports the following Brooktrout versions:
| • | SDK 6.2.0 with API 6.2 Supported by CopiaFacts F7BM.DLL |
| • | SDK 6.0.0 with API 6.0 Supported by CopiaFacts F7BM60.DLL |
| • | SDK 5.2.2 with API 5.4 Supported by CopiaFacts F7BM54.DLL |
The COPIAFACTS engine only ever loads F7BM.DLL, but will detect the installed Brooktrout version and advise if you need to rename the supplied DLLs.
| • | If you have API 6.0 installed, you need to rename F7BM.DLL to F7BM62.DLL, then rename F7BM60.DLL to F7BM.DLL. |
| • | If you have API 5.4 installed, you need to rename F7BM.DLL to F7BM62.DLL, then rename F7BM54.DLL to F7BM.DLL. |
The installed API version number can be found from the first two parts of the Windows file version number of BOSTDLLD.DLL.
| • | SDK 6.0.0 with API 6.0 Supported by CopiaFacts F7BM.DLL |
| • | SDK 5.2.2 with API 5.4 Supported by CopiaFacts F7BM54.DLL |
| • | SDL 5.1.3 with API 5.3 Supported by CopiaFacts F7BM53.DLL |
|
| • | SDK 5.2.2 with API 5.4 Supported by CopiaFacts F7BM.DLL |
| • | SDK 5.1.3 with API 5.3 Supported by CopiaFacts F7BM53.DLL |
| • | SDK 5.0.0 with API 5.2 Supported by CopiaFacts F7BM52.DLL |
|
| • | SDK 5.1.3 with API 5.3 Supported by CopiaFacts F7BM.DLL |
| • | SDK 5.0.0 with API 5.2 Supported by CopiaFacts F7BM52.DLL |
| • | SDK 3.3.2 with API 4.9 Supported by CopiaFacts F7BM49.DLL |
|
Installation
For a new install, install the Brooktrout software from BOSTON.MSI (or run this from CDAUTO) before installing your boards.
If you already have an earlier Boston release installed, uninstall it first, and then reboot. If you already have boards installed, make sure that they are detected in Windows Device Manager before running CONFIGTOOL (from Start/Programs/Brooktrout/Brooktrout Configuration Manager).
If your boards are not enabled in Device Manager, right-click and select 'update the drivers'. Later Windows releases may find plug-and-play drivers automatically; if not, navigate in the New Hardware Wizard to the drivers\pnp folder in the folder where you installed the Brooktrout software, for example:
c:\program files\Brookrout\driver\pnp
After you the board drivers enabled in Device Manager, you can run the Brooktrout CONFIGTOOL program. Make sure that the 'Dialogic Corporation Boston Host Service' is set to start automatically, either in the Windows Services manager or from Options/Preferences in CONFIGTOOL
Machine Startup
With early releases of Brooktrout software, "CONFIGTOOL /s" had to be run after each reboot or power-cycle. This should no longer be necessary if you have the Boston service set to start automatically.
Debugging
The Brooktrout debugging for TR1034 is enabled by means of the Brooktrout CONFIGTOOL program, on the BTCall Parameters page. You can also set the debug filename on this screen. The CopiaFacts 'Debug Low-Level Voice/Fax' option does not embed any Brooktrout debug lines in the CopiaFacts trace as is the case with some other board interfaces.
Topic url:
http://www.copia.com/support/refmanual/index.html?brooktrouttr1034faxvoice.htm
