Hardware > Brooktrout Netaccess > Netaccess Channel Map for 1 E1 trunk with 30 channels

The sample below is for Brooktrout API 4.3 and ECC 1.75. For Brooktrout API 4.1.1 with ECC 1.62, omit the first column in the table.

Note that the top two channels on your two TR114-I16V or TR114-P16V cards will be unused

Edit C:\BFAX\SERVER\BCHANMAP.CFG and paste in the following text:

# E1 PRI Using 30 channels on one E1 line

# Config file to setup b-channels

# board port bchannel mvip_stream mvip_timeslot

0 1 1 6 0

0 1 2 6 1

0 1 3 6 2

0 1 4 6 3

0 1 5 6 4

0 1 6 6 5

0 1 7 6 6

0 1 8 6 7

0 1 9 6 8

0 1 10 6 9

0 1 11 6 10

0 1 12 6 11

0 1 13 6 12

0 1 14 6 13

0 1 15 6 14

0 1 17 6 15

0 1 18 6 16

0 1 19 6 17

0 1 20 6 18

0 1 21 6 19

0 1 22 6 20

0 1 23 6 21

0 1 24 6 22

0 1 25 6 23

0 1 26 6 24

0 1 27 6 25

0 1 28 6 26

0 1 29 6 27

0 1 30 6 28

0 1 31 6 29

There must be NO blank lines in this file. If there are blank lines, the btnaservice may fail to start.