Hardware > Brooktrout Netaccess > Netaccess Channel Map for 2 E1 trunks with 16 channels each

The sample below is for Brooktrout API 4.3 and ECC 1.75. For Brooktrout API 4.1.1 with ECC 1.62, omit the first column in the table.

Edit C:\BFAX\SERVER\BCHANMAP.CFG and paste in the following text:

# E1 PRI Using 16 channels on each E1 line

# Config file to setup b-channels

# board port bchannel mvip_stream mvip_timeslot

0 0 1 6 0

0 0 2 6 1

0 0 3 6 2

0 0 4 6 3

0 0 5 6 4

0 0 6 6 5

0 0 7 6 6

0 0 8 6 7

0 0 9 6 8

0 0 10 6 9

0 0 11 6 10

0 0 12 6 11

0 0 13 6 12

0 0 14 6 13

0 0 15 6 14

0 0 17 6 15

0 1 1 6 16

0 1 2 6 17

0 1 3 6 18

0 1 4 6 19

0 1 5 6 20

0 1 6 6 21

0 1 7 6 22

0 1 8 6 23

0 1 9 6 24

0 1 10 6 25

0 1 11 6 26

0 1 12 6 27

0 1 13 6 28

0 1 14 6 29

0 1 15 6 30

0 1 17 6 31

There must be NO blank lines in this file. If there are blank lines, the btnaservice may fail to start.