Set the Lowest Transmission Speed Allowed
$baud_min chan baud
This command sets the lowest baud rate allowed for image transmission. If the negotiated baud rate is below the minimum specified, the call will be terminated. For Diva boards, the call will also be ended if the baud rate drops below the minimum during transmission.
This command can be overridden for a specific application by using a $baud_min command in the user profile or with the MIN_BAUD variable.
CopiaFacts does not prevent you from setting the minimum baud rate to be greater than the maximum baud rate. If this is the case on a system supporting both commands, all faxes will fail.
The parameters on this command are used as follows:
| chan | the channel number or channel group(s) affected, or * for all channels. The same channel must not be specified more than once. |
| baud | minimum rate, a multiple of 2400 up to 33600. |
Hardware Issues: This command is currently only available for Diva, XCAPI and Brooktrout boards/ports. For BladeWare, the minimum baud rate has to be set in the BladeWare Profile values FaxSender_OTF_T30MinRate and FaxReceiver_OTF_T30MinRate.
Default: All baud rates will be acceptable.
Example:
$baud_min * 7200 ; stop transmission if under 7200 baud
