Set the Default User Profile for the Channel
$default_profile chan filename
This command is used to set the default user profile to be used for each channel. The command supersedes the $fax_profile command used in earlier releases, which could not be used for mail applications. The default profile specified by this command is overridden when a specific numbered user profile is selected in DID operations (and, very exceptionally, when a $mail_profile has also had to be specified because the fax mail operations are only scheduled at certain times).
The parameters on this command are used as follows:
| chan | the channel number or channel group(s) affected, or * for all channels. Only the first assignment for a channel is used. |
| filename | the filename (without full path) of the user profile (.USR) file. The directory is specified by the $user_profiles command. An attempt to assign FAX.USR as the default profile is ignored. |
This command should be used when different channels need different user profiles. It is not needed when all channels use the same profile, which can then be named as FAX.USR.
Default: FAX.USR is used as the default user profile for all operations
Example:
$default_profile 1 line1.usr
$default_profile 2 line2.usr
$default_profile 3 00003001.usr
$default_profile * faxapp.usr ; all other channels same profile
