1002 Error preprocessing configuration file
1003 Configuration file error
An error occurred during loading of the configuration file. Other messages will normally have preceded this message to highlight the specific error that occurred. The preprocess pass through the file is used to set up any $environment commands before the main pass through the file, and also to handle certain hardware parameters that have to be set before the board is initialized.
1006 MSMQ error on line #n: x
The system was unable to initialize the MSMQ queue for e-mail or SMS FS files
1010 Unable to initialize Brooktrout board for channel x
1015 No Brooktrout boards found or Boston Service not running
1016 Too many Brooktrout channels found
1021 Too many Diva/XCAPI fax channels found
1022 Unable to load CF9WMI to enumerate COM ports
1023 Invalid DLL CF9WMI.DLL
1027 Cannot query Brooktrout feature set [module x, error x]
1028 Cannot determine board features [module x, error x]
1029 Board startup failure, details in error trace file
1030 Board init failure, details in error trace file
1034 Unable to find or read BTCALL.CFG
The necessary drivers for your fax board(s) have not been initialized, or the board(s) which they control are not properly installed or set up. Check that Windows is loading the correct drivers and that they are not reporting errors at load time in the event log.
1041, 1046, 1047, 1052, 1056, 1057
Incorrectly set up Brooktrout configuration.
1601 Dialogic PRI telephony channel specified for channel x, not supported
1602 Dialogic RB telephony channel specified for channel x, not supported
1603 Dialogic voice channel specified for channel x, not supported
1604 Brooktrout TR114 voice channel specified for channel x, not supported
1605 Dialogic fax channel specified for channel x, not supported
1606 Brooktrout TR114 fax channel specified for channel x, not supported
1607 Gammalink fax channel specified for channel x, not supported
1608 Fax modem channel specified for channel x, not supported
1609 Fax resource channel specified for channel x, not supported
The FAXCOUNT.HWL file contains channels of types which are no longer supported.
1728 Out of memory for startup
Consult your CopiaFacts supplier for assistance
1732 Cannot assign voice channel n for channel m
1733 No voice channel n exists for channel m
1734 Cannot assign fax channel n for channel m
1735 Unknown board type x for channel n for channel m
1736 No x channels free for dynamic allocation
1737 Option for channel n requires voice
1738 Option requires fax
1739 Option requires fax and voice
The hardware and channel settings defined by the configurator CFHWL for the node and saved in FAXCOUNT.HWL do not match the physical hardware found or the line operations requested.
1756 Warning: cannot find a wave output device for phone simulation
The configured phone/fax simulation feature is not available because this node has no voice board.
1758 Voice channel n has been excluded from use by CopiaFacts
1759 Fax channel n has been excluded from use by CopiaFacts
An $exclude_channel command has excluded a channel which the CopiaFacts configuration is attempting to make use of.
1762 Board count n exceeds maximum permitted by CopiaFacts
There is a problem with node configuration in FFHWL.
1763 Unable to get device information for Diva board n, error n
1764 Unable to register with DivaServer API, error x
1765 Unable to initialize DivaServer API, error x
There is a problem with the Diva installation
1766 No voice capability on this Brooktrout channel
The Brooktrout configuration is incorrect
1767 Unable to set device status reporting
The board in use does not support device status reporting.
